Electric Gate Help & Installation
All our fitting instructions are in English. Our wiring diagrams use colour coded wires, clear component pictures and numbered terminals. A step by step guide is provided to guide you through the fitting process, and free help is available from an experienced installer. Our technical team can be contacted on 01226 370549.
Use & Maintenance Manuals
Use & Maintenance Manual Swing Gates
Use & Maintenance Manual Overhead Doors
Use & Maintenance Manual Sliding Gates
Use & Maintenance Manual Barriers
Electric Gate Pre installation
The following fact sheets are available:
- Wiring requirements for gate kits & components.
- Motor measurement table for above ground kits.
- Example wiring diagram for Alpha & Euro Kits.
- How to fit above ground motors into brick pillars.
- Underground motor / box measurements.
- Sliding gate rolling gear.
- Sliding gate automation dimensions.
Please contact us for the above.
Or visit our manuals site https://www.knowledgebase.egates.co.uk/
Quote aide
Swing Gate Automation Installation
Common Swing Gate Hinge Positions
Aboveground Motor Geometry
Swing Gate Safety Edge Positions
Sliding Automation Installation
Sliding Safety Edge Positions
Underground Automation Installation
Underground Automation Hinge Clearance
The Brushless underground kit requires a minimum clearance of 67mm from the pivot point of the gate to the edge of the pillar (Measurement B on the illustration below). Please confirm this clearance measurement on your gate before installing in order for the kit to work perfectly?
